1. Description of JIS-D0207-F2 Sand Dust Test Chamber
Standard:IEC60529/EN 6052
Function:These test chambers are used for evaluating the effects of dust-filled environments in order to validate product seal integrity.
Application:Dust test chambers are utilized in automotive,electrotechnical products,materials,coatings,solar energy,etc.
2. Features of JIS-D0207-F2 Sand Dust Test Chamber
• Dust re-cycle blowing by circulating pump.
• Dust collection section is located on bottom of test chamber.
• A heater fixed into test chamber to keep dust dry.
• A viewing window with a manually controlled wiper.
• Programmable color display touch screen controller
• A stainless steel shelf for placing test specimens.
• Test chamber internal illumination
• Vacuum system for specimen
• Bottom install 4 castors for ease moving, andwith brakes function
• Safety protection
• Easy to operate
• Standard: IEC60529
3. Technical Parameter of JIS-D0207-F2 Sand Dust Test Chamber
| Model | JIS-800 | JIS-1000 | JIS-1500 | JIS-2000 |
| Internal dimensions (mm) | 800*1000*1000 | 1000*1000*1000 | 1000*1500*1000 | 1200*1800*1200 |
| Overall dimensions (mm) | 1040*1450*1960 | 1200*1450*1960 | 1250*1900*1960 | 1500*2200*2160 |
| Temperature range | Ambient to +50℃ |
| Normal wire diameter | 50um |
| Normal width of a gap between wire | 75um |
| The Talcum powder amount | 2kg ~ 4kg/m3 |
| Fight time | 0 ~ 99H59M |
| Fan cycle time | 0 ~ 99H59M |
| Specimen power outlet | Dust-proof socket AC220V 16A |
| Controller | programmable color display touch screen controller |
| PC Link, RS232 interface |
| Heating system | Independent Nichrome electronic heating system |
| Exterior material | Steel Plate with protective coating |
| Interior material | SUS304 stainless steel |
| Power supply | 380V 50HZ |
4.Packaging
